Mini Heat Gun Handheld Portable Heat Gun, 300W Multifunction Hot Air Gun Heat Guns for Embossing Shrink Wrapping Paint Drying DIY Crafts

Portable Heat Gun, 300W Multifunction Hot Air Gun, Handheld Heat Guns for Crafts, Fabric, Shrink Wrapping PVC, Drying Paint, Clay, DIY Tools

DIY soft ceramic hot air gun specifications:
Voltage: 230V
Power: 300W
Temperature range: ≤200°C
Outlet diameter: 12mm
Power cord length: about 95mm
Size: 225x42x25mm/8.9×1.7×0.98inch

Instructions:
1. Plug in the power supply and turn on the switch.
2. Keep a distance of 3-5cm from the work and heat it at an angle of about 45 degrees until the work is completed.
3. Turn off the power and wait for it to cool down.

You can directly blow hard with a hot air gun to make small soft pottery works.
The temperature of this hot air gun cannot be adjusted, and the muzzle can reach about 200° within a few seconds.
When blowing soft pottery, do not stay in one place for more than 3 minutes at an angle of about 45 degrees to prevent heat from sucking back.
The heat gun has a high temperature, so be careful of burns when using it.

DIY Essentials Part : If you like DIY, this is a good accessory for you. You can replace toaster or oven and the polymer clay will become hard and bright after using the gun

Suitable for embossing powder, heat-shrinkable film, clay, rubber stamp, fast-drying paint, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle.