Hakko Green 40W/220V/502G Soldering Iron

When the power is on, the tip temperature can reach over 300°C (572°F). Since mis handling may lead to burns or fire, be sure to comply with the following precautions.

Do not touch the tip and the metallic parts near the tip Do not use the unit near flammable items

Unplug when the unit is not in use

Do not warm up the soldering iron with the tip pointing

| down.

Do not use the unit for applications other than soldering, Do not wet the unit or use the unit when your hands are

wet

Do not modify the unit. Use only genuine HAKKO replace. Do not shock the unit, otherwise the heating element will

ment parts.

be damaged ● The soldering process will produce smoke, so make sure

the area is well ventilated.

How to solder 1. Press the tip lightly against the part to be soldered and heati

the part.

2. Melt the solder by touching it against the part. 3. When melted solder has spread over the part, remove the tip

from the part and allow the solder to harden. Note

• Remove residual solder or anydirt with a moistened cleaning

sponge or the tip cleaner. Coat the tip with fresh solder after use.

Before replacing the parts, turn the power off and allow the unit to cool to room temperature.

The first time you use the soldering iron, it may smoke slightly

as the heating element dries out

This is normal and should only last for approx 10 minutes.