Intelligent Touch-Inductive Water Saving Device (CF8806)

PRODUCT AND FUNCTION
Intelligent Touch-Inductive Water Saving Device
Wrench
Data Wire

1. When charging, the system will automatically initialize and restart all configurations the previously set wavelength needs to be reset (see the installation and use video for setting) and eliminate all faults (The mechanical valve of faucet should be closed before fault elimination).
2. Green light will be always on when fully charged.
3. During operation, indicator light will flash once referring that operation is successful.
4. When touch key press is open for 3 minutes, water outlet will be closed automatically; when continuous infrared sensor is open for 30s, the water outlet will be closed automatically, too. (Timer will restart with a new operation)
5. Indicator light will flash each time when device is under low voltage, warning that battery voltage is low and please charge in time.
6. The infrared sensor at bottom has switch high-on (0-7cm) and low-off (0-16cm), with 3 adjustable wavelengths (for details please watch the installation video).

Model: CF8806
Size: 63x63x37mm
Standby power consumption: ≤0.2mW
Water Pressure: 0.05-0.8MPa
Sensing Range: Frontal Touch/ Bottom Sensing About 0-16cm
Water Use Efficiency: Level 1
Water Flow: 0.0L/s
IP Grade: IPX6
Battery Capacity: 800mA
Duration: About Months 8
Water Temperature: 1-75c