Hakko Green 30W/220V/501G Soldering Iron
QR105.00
Product Description
• Economical
• Lightweight design
• Ideal for circuit boards, small electric parts, connectors and wiring connections
-Power Consumption 30W
-Total Length (w/o cord) 248 mm (9.7 in.)
-Heating Element: Nichrome
When the power is on, the tip temperature can reach over 300°C (572°F). Since mis handling may lead to burns or fire, be sure to comply with the following precautions.
Do not touch the tip and the metallic parts near the tip Do not use the unit near flammable items
Unplug when the unit is not in use
Do not warm up the soldering iron with the tip pointing
| down.
Do not use the unit for applications other than soldering, Do not wet the unit or use the unit when your hands are
wet
Do not modify the unit. Use only genuine HAKKO replace. Do not shock the unit, otherwise the heating element will
ment parts.
be damaged ● The soldering process will produce smoke, so make sure
the area is well ventilated.
How to solder 1. Press the tip lightly against the part to be soldered and heati
the part.
2. Melt the solder by touching it against the part. 3. When melted solder has spread over the part, remove the tip
from the part and allow the solder to harden. Note
• Remove residual solder or anydirt with a moistened cleaning
sponge or the tip cleaner. Coat the tip with fresh solder after use.
Before replacing the parts, turn the power off and allow the unit to cool to room temperature.
The first time you use the soldering iron, it may smoke slightly
as the heating element dries out
This is normal and should only last for approx 10 minutes.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.